Fujitsu PRIMERGY CX400 M4, Руководство по эксплуатации

Страница: 75 / 84

CX400 M4 Server Enclosure
Operating Manual 75
7 Troubleshooting and tips
V
CAUTION!
Follow the safety instructions in the "Safety Notes and Regulations"
manual or "
安全上のご注意 " and in chapter "Important information" on
page 29 .
If a fault occurs, attempt to resolve it using the measures described:
– in this chapter,
– in the documentation for the connected devices,
– in the help systems of the software used.
If you fail to correct the problem, proceed as follows:
Ê
Make a list of the steps performed and the circumstances that led to the fault.
Also make a list of any error messages that were displayed.
Ê
Switch off the server.
Ê
Contact our customer service team.
I
The meaning of the error message is explained in the documentation for
the relevant components and programs, available online at
http://manuals.ts.fujitsu.com .
Power-on indicator remains unlit after you have switched on your device
Cause Troubleshooting
Power cable
incorrectly connected
Ê
Ensure that the power cable(s) is/are correctly
connected to the server enclosure and the
grounded power outlet(s).
Power supply
overloaded
Ê
Disconnect the server enclosure power plug(s)
from the grounded power outlet(s).
Ê
Wait a few minutes before you plug it/them into
the grounded power outlet(s) again.
Ê
Switch on your server enclosure.