BX620 S6
Operating Manual
27
Safety instructions
V
CAUTION!
●
Do not connect or disconnect any data transmission cables during a
thunderstorm (lightning hazard).
●
Make sure that no objects (e.g. jewelry, paperclips etc.) or liquids get
inside the unit (electric shock hazard, short circuit).
●
In emergencies (e.g. damaged casing, controls or cables, penetration
of liquids or foreign bodies), switch off the server immediately, remove
all power plugs and contact your sales outlet or customer service
team.
●
Proper operation of the system (in accordance with
IEC 60950-1/EN 60950-1) is only ensured if the casing is completely
assembled and the rear covers for the installation slots have been
fitted (electric shock, cooling, fire protection, interference
suppression).
●
Install only system extensions that satisfy the requirements and rules
governing safety, electromagnetic compatibility, and telecommunica-
tions terminal equipment. If you install other extensions, you might
damage the system or violate these safety regulations. You can find
out which system extensions are suitable from the customer service
center or your sales outlet.
●
The components marked with a warning label (e.g. lightning symbol)
may only be opened, removed or exchanged by authorized, qualified
personnel. Exception: hot-pluggable power supply units can be
replaced.
●
If you cause a defect on the device by installing or exchanging system
extensions, the warranty will be invalidated.
●
Only set the resolutions and refresh rates specified in the operating
manual for your monitor. Otherwise, you may damage the monitor. If
you are in any doubt, contact your sales outlet or customer service
center.
