Fujitsu PRIMERGY 4Gbit/s FC I/O Modules, Руководство пользователя

Страница: 17 / 40

4 Installing Drivers and Utilities
55
E
4.2
Manual Installation
Drivers and utilities can be manually installed using the following procedures.
4.2.1 For Installation on Windows Server 2003
When "Welcome to the Found New Hardware Wizard" appears during startup, click
[Cancel].
Installing Emulex PLUS
1
Click the "Start" button
→
"Control Panel"
→
"Add Hardware" in this
order.
2
Click [Next].
3
Check "Yes, I have already connected the hardware", and click
[Next].
4
From "Installed hardware", select "Add a new hardware device",
and click [Next].
5
Check "Install the hardware that I manually select from a list", and
click [Next].
6
From "Common hardware types", select "Show All Devices", and
click [Next].
7
Click [Have Disk].
8
Insert the driver disk (CD-ROM) into the CD-ROM drive.
9
Specify the following folder in the CD-ROM drive for "File copy
source of the manufacturer", and click [OK].
• For 32Bit
[CD-ROM drive]: \v1.30a9\AutoPilot Installer\Drivers\Sporport\x86
• For 64Bit
[CD-ROM drive]: \v1.30a9\AutoPilot Installer\Drivers\Sporport\x64
10
Select "Emulex PLUS", and click [Next].
11
Click [Next].
12
Click [Finish].