44
13 Install the door-side hinges.
・
Using the door-side hinges removed in step 5, secure the door-side hinges with M6 hexagon socket bolts.
14 Install the front door.
・
With the door open to about 90 degrees, slide it sideways to insert the door-side hinges(pins) into the rack-side hinges.
Note: When installing or removing the door, be careful not to get your fingers caught in the gap between the door and
the rack.
4.2 Attaching the Cable Holder
■ Confirm the components, and prepare the necessary
tools.
Confirm that all components have been delivered (see the table below).
Component and quantity
Cable holder x 1, M5 flat head screw x 1, M5 core spring nut x 1
Also, prepare the necessary tools:
・
Phillips screwdriver (No. 2 bit): For the M5 flat head screw
4.3 Attaching a Stabilizer (L-shaped)
■ Confirm the components, and prepare the necessary tools.
Confirm that all components have been delivered (see the table below).
※
In case of install a stabilizer must be done by customers.
・
Front Stabilizer for PRIMERGY 19inch Rack(Wide / Expansion / rear CDU installed)
Type name: PY-RS82
Product name
Quantity
Stabilizer body
1
M10 bolt
4
Also, prepare the necessary tools:
・
Spanner: For M10 bolts
Type name
Front
Rear
19R-27CM1
19RB27CM1
19R-27CM2
19RB27CM2
M6 hexagon socket bolt
door-side hinge