39
2 Remove the brackets from the rack.
・
Remove the M6 hexagon socket bolt to remove the three places rack-side hinges.(a-1)
・
Remove the M6 hexagon socket set screws to remove the bar nuts for the three places hinges.(a-2)
・
Remove the upper and lower door stoppers, and then remove the core spring nuts.
・
Remove the M5 screws to remove the upper and lower door stoppers, and then remove the M5 core spring nuts.(b-1,b-2)
・
Remove the M6 flathead screws to remove the 4 places lock plates.(c-1)
・
Remove the M6 hexagon socket set screws to remove the bar nuts for the 4 places lock plates.(c-2)
For information on the procedure for removing the core spring nuts, see "4.2 Installing and Removing Core Spring Nuts”
which is described in the User’s manual of the 19-inch rack Model 2742"
3 Install bar nuts for the hinges, lock plates and core spring nuts.
Install some of the parts that were removed in step 2, on the side horizontally opposite the standard side.
・
Insert bar nuts for the hinges in the three places of left H frame, and secure them with M6 hexagon socket set screws.
・
Insert M5 core spring nuts at the upper and lower parts of the right H frame.
・
Insert bar nuts for the lock plates in the 4 places of left H frame, and secure them with M6 hexagon socket set screws.
For information on the procedure for installing the core spring nuts, see "4.2 Installing and Removing Core Spring Nuts"
which is described in the User’s manual of the 19-inch rack Model 2742"
rack-side hinge
lock plate
door stopper
a-1
a-2
c-2
c-1
b-2
b-1