Fujitsu P8110 Скачать руководство пользователя

Страница: 22 / 76

Working with the notebook

Battery indicator

Num Lock indicator

Caps Lock indicator

Scroll Lock indicator

Power-on indicator/standby (status indicator and ON/OFF switch)

Standbyindicator

Power-onindicator

•

Indicator is illuminated: The notebook is switched on.

•

Indicator

ashes: The notebook is in standby mode.

•

Indicator is off: The notebook is switched off.

Batter charging indicator / Mains connection

The state of charge of the battery is shown by the battery indicator.

•

Indicator is illuminated (green): The battery is charged or no battery has been
inserted.

•

The indicator lights up orange: the mains adapter is connected and the battery
is being charged.

•

Indicator

ashes orange: the mains adapter is connected but the battery cannot

be charged as the battery is too hot or cold for charging. The charging process
is continued as soon as the battery reaches a permissible temperature again.

•

Indicator

ashes red: An error has occured.

•

The indicator is not illuminated: the mains adapter is not connected.

Batterystatusindicator

Batterysymbol

Batteryindicator

Battery indicator

•

Indicator is illuminated (green): The battery is charged to between 50% and
100% of its maximum capacity.

•

The indicator lights up orange: The battery is charged to between 13% and
49% of its maximum capacity.

•

The indicator lights up red: The battery is charged to between 0% and 12% of
its maximum capacity.

•

Indicator

ashes red: An error has occured.

Energy saving functions indicator

•

Indicator is illuminated: None of the energy saving functions have been
activated.

•

Indicator is not illuminated: The energy saving functions have been deactivated.

Drive indicator

Drive

Indicator

Indicator is illuminated: One of the drives (e.g. hard disk, CD/DVD) is being
accessed.

Num Lock indicator

Indicator

NumLock

Indicator is illuminated: The

Num

key has been pressed. The virtual numerical

keypad is activated. You can output the characters indicated on the upper right of
the keys.

A26391-K218-Z200-1-7619, edition 1

Содержание P8110













































































Результаты поиска

Содержание P8110

Отзывы:

Похожие инструкции для P8110

Бренды по названию

Популярные бренды

Fujitsu P8110, Руководство по эксплуатации

Результаты поиска

Содержание P8110

Отзывы:

Похожие инструкции для P8110

Бренды по названию

Популярные бренды