E-16
EXAMPLE OF CONNECTING EXTERNAL EQUIPMENT
• Connect the Video signal cable to the HDMI input terminal, Component Video input terminal, S-Video input terminal, or the Video input
terminal.
• If the equipment to be connected is equipped with HDMI out put terminal and Component Video output terminal, it is recommended to
connect to only one of the terminals. If the HDMI output is connected, an Audio signal cable does not need to be connected.
• The table below shows the settings of Audio inputs. (Factory setting)
* For changing of Audio input settings, see Audio Input on P. E-38.
To Video output
To S-Video
output
To Audio output
To Audio input
To Video
input
To S-Video input
To Component
Video output
To Component
Video input
To HDMI input
To HDMI
output
Bottom of the plasma display
DVD or VCR
Video input
Audio input
RGB1(D-sub)
Audio1
Video1(Video)
Audio2
Video2(S-video)
Audio2
Video3(Component Video)
Audio3
Video4(Component Video)
Audio3
Video5(HDMI)
Audio4(HDMI)
Note
• Unplug the power cord from the AC outlet before you connect external equipment.
• You should also refer to the instructions for the equipment to be connected.
MHD02098‑01̲E.book 16 ページ ２００５年１２月２８日 水曜日 午前９時１６分
