81
- Memory Upgrade Module
Checking the Memory Capacity
Once you have changed the system memory capacity by replacing the installed module with a larger one,
be sure to check that your notebook has recognized the change.
Windows XP:
Check the memory capacity by clicking [Start] > Control Panel, then double-clicking the
System icon. Select the General tab and check the amount of memory under “Computer:”
Installing a Memory Upgrade Module
1
Remove the new memory upgrade module from the
static guarded sleeve.
2
Align the memory upgrade module with the
component side up. Align the connector edge of the
memory upgrade module with the connector slot in
the compartment. (Figure 27)
3
Insert the memory upgrade module at a 45° angle.
Press the connector edge of the module firmly down
and into the connector until it lodges under the
retaining clip. You will hear a click when it is properly
in place.
4
Replace the cover.
5
Replace the screws.
Figure 27. Installing a Memory Module
T
HE
MEMORY
UPGRADE
MODULE
IS
NOT
SOMETHING
YOU
ROUTINELY
REMOVE
FROM
YOUR
NOTEBOOK
.
O
NCE
IT
IS
INSTALLED
,
YOU
SHOULD
LEAVE
IT
IN
PLACE
UNLESS
YOU
WANT
TO
CHANGE
SYSTEM
MEMORY
CAPACITY
.
