Fujitsu LTO-5, Руководство пользователя

Страница: 34 / 34

34
LTO-5 Half-Height SAS Tape Drives
Problems with cartridges
6.3.2 The drive will not accept the cartridge (or ejects it
immediately)
The cartridge may have been damaged, for example dropped, or the drive may
have a fault. If it is a cleaning cartridge, it has probably expired and should be
discarded immediately. For data cartridges:
1. Check that the drive has power (the power cord is properly connected and
the Ready LED is on).
2. Check that you are using the correct media. Use only LTO media.
3. Make sure that you have loaded the cartridge with the correct orientation
(see "Loading a cartridge" on page 13 ).
4. Check for damage to your media and discard it, if it is damaged.
5. Use a new or known, good piece of media and see if it loads. If it does, the
original cartridge is faulty and should be discarded.