Fujitsu Lifebook T580 Скачать руководство пользователя страница 24

Страница: 24 / 123

Working with the notebook

Status displays

Description

Power-on indicator

•

Indicator is illuminated: The notebook is switched on.

•

Indicator

ashes: The notebook is in sleep mode (Save-to-RAM).

•

The indicator is not illuminated: The notebook is switched off or in
Save-to-Disk mode.

Battery charging indicator

The battery charging indicator shows whether a battery is installed and being
charged.

•

The indicator is lit green: AC power supplied, battery charge completed.

•

The indicator is lit orange: AC power supplied, battery charge on the way.

•

The indicator

ashes orange: AC power supplied, error while battery

charge.

•

The indicator is not lit: No AC power supplied.

Battery indicator

The battery indicator shows the state of charge of the installed battery.

•

The indicator is lit green: The battery is between 50 % and 100 %
charged.

•

The indicator is lit orange: The battery is between 13 % and 49 %
charged.

•

The indicator is lit red: The battery is between 0 % and 12 % charged.

•

The indicator

ashes orange: The battery state of charge is being

checked (for four seconds after battery installation).

•

The indicator

ashes red: The battery is faulty.

•

The indicator is not lit: There is no battery installed.

Drive indicator

The indicator is illuminated: The hard disk drive of the notebook is being
accessed.

Num Lock indicator

Indicator is lit: The

Num

key has been pressed. The virtual numerical

keypad is activated. You can output the characters indicated on the upper
right of the keys.

Caps Lock indicator

The indicator is illuminated: The Caps Lock key has been pressed. All letters
are output as capital letters. In the case of overlay keys, the character printed
on the upper left of the key will appear when that key is pressed.

Scroll Lock indicator

Indicator is lit: The key combination

Scr

has been pressed. The effect

that this key has varies between applications.

Fujitsu Technology Solutions

Содержание Lifebook T580




























































































































Результаты поиска

Содержание Lifebook T580

Отзывы:

Похожие инструкции для Lifebook T580

Бренды по названию

Популярные бренды

Fujitsu Lifebook T580, Руководство по эксплуатации

Результаты поиска

Содержание Lifebook T580

Отзывы:

Похожие инструкции для Lifebook T580

Бренды по названию

Популярные бренды