177
The
Enrollment
interface allows you to enroll fingerprints. For the procedure to enroll and authentication device refer
to
Chapter 2.3
. To enroll additional fingerprints, click
Enroll Authentication Device
, and authenticate with OmniPass.
Select the fingerprint recognition device in the
Select Authentication Device
screen (it should already be marked by
a green check if you have a finger enrolled) and click
Next
.
System Settings
The OmniPass
Startup Options
interface can be found in the System Settings tab. With these options you can specify
how your OmniPass Logon is tied to your Windows Logon.
The first option,
Automatically log on to OmniPass as the current user
, will do just as it says; during Windows login,
you will be logged on to OmniPass using your Windows login credentials. If the user logging into Windows was never
enrolled into OmniPass, upon login no one will be logged on to OmniPass. This setting is appropriate for an office
setting or any setting where users must enter a username and password to log into a computer. This is the default
setting.
With the second option,
Manually log on to OmniPass at startup
, OmniPass will prompt you to login once you have
logged on to Windows.
With the third option,
Do not log on to OmniPass at startup
, you will not be prompted to be logged on.
You can manually log on to OmniPass by right-clicking the OmniPass taskbar icon and clicking
Log in User
from the
right-click menu.
Troubleshooting
You cannot use OmniPass to create Windows users. You must first create the Windows user, and you will need
administrative privileges to do that. Once the Windows user is created, you can add that user to OmniPass using the
same username and password
Cannot add Windows users to OmniPass
If you experience difficulties adding a Windows user to OmniPass, you may need to adjust your local security settings.
You can do this by going to
Start, Control Panel
,
Administrative Tools,
and
Local Security Settings
. Expand
Local
Policies
, expand
Security Options
, and double-click
Network Access: Sharing and Security Model for Local
Accounts
. The correct setting should be
Classic - Local Users Authenticate as Themselves
.
Cannot add a User with a Blank Password to OmniPas
