Fujitsu Lifebook P7120, Руководство пользователя

Страница: 19 / 120

11
G e t t i n g t o K n o w Y o u r L i f e B o o k
Figure 2-7 LifeBook notebook bottom panel
BOTTOM COMPONENTS
The following is a brief description of your LifeBook
notebook’s bottom panel components.
Port Replicator Connector
The port replicator connector docks with the connector
on the optional port replicator to provide additional
connectivity.
Battery Release Latches
Slide the battery releases to unlatch the battery.
Lithium ion Battery
The internal Lithium ion battery can be installed in the
battery bay by aligning it with the slides and pushing it
into place. The battery can be removed when swapping
with a charged battery, or when the computer is to be
stored for a long period of time.
(See Lithium ion Battery
on page 31 for more information)
Hard Disk Drive Cover
Removable cover over the hard disk drive. Under ordi-
nary circumstances, it should not be necessary to
remove this cover.
Memory Module Cover
Removable cover over the memory modules. (See
Removing a Memory Module on page 40 for more infor-
mation)
Flexible Bay Release Latch
The Flexible Bay Release Latch releases the flexible bay
device for removal.
(See Removing and Installing
Modular Devices on page 18 for more information)
Air Vents
The air vents allow for proper cooling of the system
while it is operating.
Main Lithium ion Battery
Memory Module Cover
Flexible Bay Release Latch
Battery Release Latches
Port Replicator Connector
Hard Disk Drive Cover
Air Vents (several locations)
To protect your notebook from damage
and to optimize system performance, be
sure to
keep all air all vents unobstructed ,
clean, and clear of debris . This may require
periodic cleaning, depending upon the
environment in which the system is used.
Do not operate the notebook in areas
where the air vents can be obstructed, such
as in tight enclosures or on soft surfaces
like a bed or cushion.
P7120.book Page 11 Monday, October 10, 2005 4:38 PM