Fujitsu LifeBook P2110, Руководство пользователя

Страница: 45 / 100

29
SECTION 2
3. Starting Your LifeBook Notebook
Power On
Suspend/Resume/Power On button
The Suspend/Resume/Power On button is used to turn on your LifeBook notebook from its off state.
Once you have connected your AC adapter or charged the internal Lithium ion Battery, you can
power on your notebook.
Critical Point
When you turn on your LifeBook notebook be sure you have a power source. This means that
at least one battery is installed and charged, or that the AC adapter is connected and has
power.
Press the Suspend/Resume/Power On button, which is located below the display on the right. When
you are done working you can either leave your LifeBook notebook in Suspend mode, or you can turn
it off.
Critical Point
Do not carry your LifeBook notebook around with the power on or subject it to shocks or
vibration, as you risk damaging your notebook.
When you Power On your LifeBook notebook, it will perform a Power On Self Test (POST) to check
the internal parts and configuration for correct functionality. If a fault is found, your LifeBook notebook
will emit an audio warning and/or an error message will displayed. Depending on the nature of the
problem, you may be able to continue by starting the operating system or by entering the BIOS setup
utility and revising the settings.
After satisfactory completion of the Power On Self Test (POST), your notebook will load your operating
system.
Critical Point
Never turn off your LifeBook notebook during the Power On Self Test (POST) or it will cause
an error message to be displayed when you turn your LifeBook notebook on the next time.
Boot Sequence
The procedure for starting-up your notebook is termed the Bootup sequence and involves your
notebook’s BIOS. When your LifeBook notebook is first turned on, the main system memory is empty,
and it needs to find instructions to start up your notebook. This information is in the BIOS program.
Each time you power up or restart your notebook, it goes through a boot sequence which displays a
Fujitsu logo until your operating system is loaded. During booting, your notebook is performing a
standard boot sequence including a Power On Self Test (POST). When the boot sequence is completed
without a failure and without a request for the BIOS Setup Utility, the system displays the operating
system’s opening screen.
SECTION 2
PAULING Sec 2_25-39 11/14/01, 9:29 AM 29