Fujitsu LifeBook P2110, Руководство пользователя

Страница: 35 / 100

18
Cold-swapping
To cold-swap modular devices in your Flexible Bay follow these easy steps:
1 Close any open files.
2 Shut down your LifeBook notebook.
3 Pull out the Flexible Bay eject lever. This will push your device out slightly, allowing you to remove
the device.
4 Slide your device out until it is clear of the bay.
This will require light force.
5 Slide the device you are installing into your notebook until it clicks into place.
6 It is now safe to turn your notebook back on.
7 You can now access and use the device.
Your LifeBook notebook will automatically detect the new device and activate it within your system.
The drive betters associated with the device will be created and listed under My Computer and
Windows Explorer.
CAUTION
Be careful when aligning and seating devices in the bay. If the fit is incorrect, you may damage
the bay or the device. If the device does not move easily in the bay, remove it, and check for dirt
or foreign objects. It will require a firm push to latch the device in place.
Flexible Bay Eject Lever
PAULING Sec 1_16-23 11/13/01, 10:27 AM 18