manualshive.com logo in svg

Fujitsu Lifebook L440, Руководство пользователя, Страница: 59 / 199

Поделиться
Скачать
Fujitsu Lifebook L440 Скачать руководство пользователя страница 59

P O I N T

The Idle mode and Standby mode fea-
tures described above are only available
in Windows 95 and Windows NT.
Windows 98 has its own integrated
power management features that include
the functionality of those listed above.

pendent of the Suspend/Resume button. This
parameter is enabled and disabled in the BIOS
setup utility.

Idle Mode

Idle mode is one of the power management
parameters. When Idle mode is enabled the
CPU is put into low-speed operation when
there is no activity (keystroke, pointer action,
sound generation, video display change,
modem transmission or reception, etc.) on
your notebook for 16 seconds. Any activity will
cause the normal operation to restart automati-
cally. This feature is independent of the
Suspend/Resume modes. This parameter is
enabled and disabled in the BIOS setup utility.
(See page 102.)

Standby Mode

Standby mode is one of the power management
parameters. When Standby mode is activated,
your notebook puts the CPU in low-sp eed
operation,shuts off the display and turns off
the hard drive when there is no activity (key-
stroke, pointer action, sound generation, video
display change,modem transmission or recep-
tion, etc.) on your notebook for the user select-
ed time-out period. (See page 102.) Any activity
will cause your notebook to return to normal
operation automatically. This feature is inde-

U s i n g   Y o u r   L i f e B o o k   L   S e r i e s

L i f e B o o k   L   S e r i e s   f r o m   F u j i t s u

49

Hard Disk Timeout

The Hard Disk Timeout is one of the power
management parameters which saves power
by turning off the hard drive if there is no hard
drive access for the timeout period which has
been set in the BIOS setup utility. (See page
101) Any attempt to access the hard drive will
cause the hard drive to restart automatically.
This feature is independent of the Suspend/
Resume button. This parameter is enabled
and disabled in the BIOS setup utility.

Windows Power Management 
Control Panels

The Power Ma n a gem ent icon in the Wi n dows 
98 Con trol Pa n el all ows you to con fig u re som e
of the power managem ent set ti n gs that are 
n orm a lly con tro ll ed by the BIOS. For instance ,
you can set ti m eo ut va lues in the Power
Ma n a gem ent Con trol Pa n el for tu rning of f
the display and for tu rning of f h a rd disks.
You can specify these ti m eo ut va lues based on
wh et h er you are running on batteries or AC .

The Power icon in the Windows 95 Control
Panel will allow you to set timeout values for
the hard drive only.

Video Timeout

The Video Timeout is one of the power man-
agement parameters which saves power by
turning off the display if there is no keyboard
or pointer activity for the user selected timeout
period. Any keyboard or pointer activity will
cause the display to restart automatically. This
feature is independent of the Suspend/Resume
button. This parameter is enabled and disabled
in the BIOS setup utility. (See page 101.)

Содержание Lifebook L440








































































































































































































Отзывы:

Нет отзывов