background image

S e c t i o n   F i v e

122

6. Set the combined notebook system down on

the adjustment feet and turn it around to
face you. (See Figure 5-3.)

7. Your notebook is ready to use.

To Hot-Undock your Notebook from the
Detachable Bay with Windows 95 or Windows 98:

1. From the Start menu,select Eject PC or press

the Undock Request button on the right side
of the Detachable Bay.

2.A Dock Change alert will appear briefly. Wait

for the Docking Indicator to illuminate.

3. Turn your system around so that it faces away

from you.

4. Grasp your notebook on both sides and tip it

up so that the bottom is facing you.

5. While keeping firm hold of your notebook

with one hand, slide the Docking Lock
Switch to the unlocked position.
(See Figure 5-4.)

6. Depress the Docking Latch Release button

on the bottom of the Detachable Bay and
gently pull the Detachable Bay away from
the notebook.

7. Set the Detachable Bay aside. Set your note-

book down and turn it around to fa ce you.

Figure 5-4 Unlatching the Detachable Bay

Figure 5-5 Undocking the Notebook from 

the Detachable Bay

Figure 5-3 Notebook Docked in Detachable Bay

10.

Your notebook is ready to use.

Содержание Lifebook L440








































































































































































































Отзывы: