11
SECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security
features of your notebook to fit your operating needs
and to view the current data security configuration.
(See
Navigating through the Setup Utility on page 2 for more
information.)
The following tables show the names of the menu fields
for the Security Menu and its submenus, all the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use. The default condition
is no passwords required and no write protection.
Figure 6. Security Menu
Remember your passwords!
If you set
and forget your User and Master hard
disk passwords, Fujitsu Computer
Systems will not be able to reset it. You
may lose data and have to replace your
system board or hard disk drive.
Entering a password incorrectly 3 times in a
row causes the keyboard and mouse to be
locked out and the warning
[System Dis-
abled]
to be displayed. If this happens,
restart the computer by turning off and on the
power with the power switch and use the cor-
rect password on reboot.
If you make an error when re-entering the
password a
Warning
will display on the
screen. To try again press [Enter], then retype
the password. Press [Esc] to abort the pass-
word setting process.
If Security Panel on Resume is Enabled and
the Password on Boot is Disabled you will not
have to type your password upon resuming
the system from the Suspend or Save-to-
Disk modes. Power Management Security
will work only if Password boot is enabled.
F1
Help
ESC
Exit
Select Item
Select Menu
-/Space
Enter
F9
Setup
Defaults
F10
Save and Exit
Change Values
Select Sub-Menu
Item Specific Help
Press <Enter> key to
set Supervisor Password
to enable any password
features.
Then password entry is
required to enter BIOS
Setup.
Supervisor Password Is:
Clear
User Password Is:
Clear
Drive0 HDD Password Is:
Clear
Set Supervisor Password
[
Enter
]
Set User Password
[Enter]
Set Drive0 HDD Password:
[Enter]
BIOS Password on Boot:
[Disabled]
HDD Password on Boot:
[Enabled]
Phoenix SecureCore(tm) Setup Utility
Info System Advanced
Security
Boot Exit
S e c u r i t y M e n u
