Fujitsu IP-900 II D, Руководство пользователя по оборудованию

Страница: 9 / 104

IP-900E/IP-900D series
vii
Work type Warning
Installation
Possibility of electric shock and fire
Do not install the device in the following places because using it there may cause a fire or
electric shock:
•
Extremely dusty or dirty place
•
Wet or humid location
•
Hot location, such as a place where the device is exposed to direct sunlight or is
near heating equipment
•
Near products (e.g., speakers) that generate a strong magnetic field
•
Location where the temperature is too hot or cold
•
In an environment with sharp temperature fluctuations
•
Area with poor ventilation
•
Near a fire
Possibility of electric shock, fire, and damage to the device
Always observe the precautions given below.
This indicates a hazardous situation that could lead to electric shock, fire and damage to
the device.
•
Always connect the power plug to a power receptacle for a standard two-prong plug
with ground.
•
Connect the device to a power receptacle with a capacity of 1 A or more. When
using a power extension cable, be sure that the total current consumption of all
devices connected to the cable does not exceed the rated capacity of the cable. If a
power receptacle with a low capacity or capacity below the rated value is used, the
power receptacle, extension cable or power wiring may overheat and start a fire.