Fujitsu General ABG30UIA-LR Скачать руководство пользователя страница 3

En-3

10 °C HEAT OPERATION

The room temperature can be maintained at 10°C so as to 
prevent the room temperature from falling too far.

 

Convenient function

PROGRAM TIMER

The program timer allows you to integrate OFF timer and ON 
timer operations in a single sequence. The sequence can in-
volve 1 transition from OFF timer to ON timer, or from ON 
timer to OFF timer, within a 24 hour period.

SLEEP TIMER

When the SLEEP timer button is pressed during heating mode, 
the air conditioner’s thermostat setting is gradually lowered 
during the period of operation; during cooling or dry mode, 
the thermostat setting is gradually raised during the period of 
operation. When the set time is reached, the unit automatically 
turns off.

 

Clean function

REMOVABLE AIR FILTER

The indoor unit’s air 

fi

 lter can be removed for easy cleaning 

and maintenance.

FEATURES AND FUNCTIONS

 

Energy saving and Comfortable function

INVERTER

At the start of operation, large amount of power is used to 
bring the room quickly to the desired temperature. Afterwards, 
the unit automatically switches to a low power setting for 
economic and comfortable operation.

ECONOMY OPERATION

When ECONOMY operation mode is operated, the room 
temperature will be little higher than the set-temp under 
cooling mode and lower than set-temp under heating mode. 
Therefore, the ECONOMY mode is able to save more energy 
than other normal mode.

OMNI-DIRECTIONAL AIR FLOW 
(SWING OPERATION)

3-dimensional control over air direction swing is possible 
through dual use of both an up/down air direction swing and 
right/left air direction swing. Since up/down air direction 

fl

 aps 

operate automatically according to the operating mode of the 
unit, it is possible to set air direction based on the operating 
mode.

SUPER QUIET OPERATION

When the FAN button is used to select QUIET, the indoor 
unit begins super quiet operation; the indoor unit’s air

fl

 ow  is 

reduced to produce quieter operation.

AUTO CHANGEOVER

The operation mode (cooling, dry, heating) is switched auto-
matically to maintain the set temperature, and the temperature 
is kept constant at all times.

OM 01_9374379736-02_en.indd   3

OM 01_9374379736-02_en.indd   3

2/24/2559 BE   20:16

2/24/2559 BE   20:16

Содержание General ABG30UIA-LR


















Отзывы: