Fujitsu FUTRO S550-2, Руководство по эксплуатации

Страница: 28 / 42

System expansions
Adding memory
Memorymodule Mainmemory Removing memory Systemexpansion Systemexpansion
If you want to remove or add memory, proceed as follows:
Please observe the safety information in chapter "Important notes", Page 6 .
Only use memory extensions for notebooks: 1 GByte and 2 GByte modules
DDR2-667 SO DIMM or DDR2-800 SO DIMM.
Never use force when installing or removing a memory extension.
Make sure that foreign objects do not fall into the memory extension compartment.
Individual components (e.g. the processor heat sink) can become very hot
during operation. We therefore recommend that you wait one hour after
switching off the device before removing or installing the memory modules.
Otherwise, there is a risk of suffering burns!
As some components are exposed that are sensitive to static electricity, please
take note of chapter
"Information about boards", Page 21 .
Removing memory modules
3
2
1
1
► Carefully push the two mounting
clips outwards (1).
Memory expansion Memory module
The memory module snaps upwards (2).
► Pull the memory module out of its slot
in the direction of the arrow (3).
Installing a memory module
2
a
1
► Insert the memory module with the contacts
and the recess (a) facing the slot (1).
Memory expansion Memory module
► Carefully push the memory module
downwards until you feel it click
into place (2).
24 Fujitsu Technology Solutions