Fujitsu fi-600F, Руководство оператора

Страница: 32 / 86

Chapter 4 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
32
How to Scan
Documents
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
Various Ways to
Scan
How to Use the
Operator Panel
Scanning a Book
1
Open the document cover.
For details, refer to "1.4 Opening/Closing the Document Cover" (page
18) .
2
Place a document on the document bed.
Place the document face-down to align its top left-hand corner with
the reference point.
3
Gently close the document cover.
For details, refer to "1.4 Opening/Closing the Document Cover" (page
18) .
4
In the scanner driver, configure the scan settings for using
the flatbed.
For details, refer to the scanner driver's Help.
5
Scan the document with the image scanning application.
For details, refer to the image scanning application manual.
4.2 Scanning Documents of Different Types and Sizes
Reference Point
ATTENTION
Take note of the following:
 A curled or folded document may create a small gap between
the document and the document bed, causing the scanned
image to be blurred.
 When the document cover is open, light from external sources
such as fluorescent lamps may pass through a document and
affect the brightness of the scanned images. The effect is
stronger for thinner documents. In such cases, close the
document cover before scanning.
Do not look directly into the light source.
ATTENTION
Do not move the document during scanning.
CAUTION