7
2.3 Connecting the interface cables
This section describes how to connect Power cable, USB cable and ADF cable, and
how to install scanner driver.
2.3.1 Connecting USB cable
Plug the USB cable into the USB connector.
Connect the opposite side of the connector to the PC.
NOTE
Be sure to use the USB cable, which comes as an accessory with this
scanner. We do not confirm the correct operation of a commercial USB
cable.
When connecting to a USB hub, use the first stage USB hub that is
closest to the computer. If you use the second or later, the scanner may
not operate correctly.
2.3.2 Connecting ADF cable
Plug the ADF cable into the ADF cable connector and secure with the two
fasteners.
2.3.3 Connecting Power cable
1) Connect the Power cable to the AC adaptor connector of the scanner.
2) Plug the AC adaptor into outlet.
Содержание FI-4010CU
