manualshive.com logo in svg

Fujitsu ETERNUS DX S5 Series, Руководство по конструкции

Серия хранилищ данных Fujitsu ETERNUS DX S5 обеспечивает надежное и мощное решение для хранения информации. Для ознакомления с дизайном и настройкой устройства предоставляется бесплатное руководство. Скачайте его с нашего сайта manualshive.com прямо сейчас и ознакомьтесь с функционалом продукта.

Поделиться
Скачать
background image

Supported Protocols

The ETERNUS DX supports Common Internet File System (CIFS), a file sharing protocol for Windows, and NFS, a
file sharing protocol for UNIX/Linux. In addition to CIFS and NFS, the ETERNUS DX supports FTP/FXP.
NAS protocols other than CIFS, NFS, and FTP/FXP are not supported.
The CIFS protocol service for the ETERNUS DX is realized by using Samba software.
CIFS and NFS are client/server protocols that can perform file management such as exclusive control on the NAS
side, which allows exclusive control over each file and simultaneous access. A file sharing environment with
different OSs, such as Windows and UNIX/Linux, can be configured.

CIFS

The CIFS is a protocol that is used for file sharing in Windows system environments.
Files on the network can be shared.

■

SMB Version

The ETERNUS DX supports access from a Windows client using SMB1.0, SMB2.0, SMB2.1, SMB3.0, SMB3.0.2, or
SMB3.1.1 protocol.
In addition, the following SMB functions are supported.

•

SMB2.1 Large MTU

•

SMB2.1 Unbuffered Handle

•

SMB3.0 Large MTU

•

SMB3.0 Encryption

The ETERNUS DX connects to Windows clients by using an SMB version that supports the protocol used by the
Windows client for access.
When the SMB version is changed due to a controller firmware update on the ETERNUS DX, the change takes
effect after the session is re-established.

■

Symbolic Link

Creating and using symbolic links that are supported by SMB2.0, for directories/files in any shared folder
(network drive) on the ETERNUS DX are available from the directories/files on the NTFS file system of the
Windows client.
In addition, for shared folders created in shared CIFS/NFS environment, referencing and using the symbolic link
for directories and files created by UNIX client from the Windows client are available.
Note that symbolic links between shared folders (network drives) are not supported (cannot be used from the
Windows client).

■

SMB Encryption

The ETERNUS DX provides a function to encrypt data communicated using SMB3.0 with an SMB protocol base.
SMB Encryption is a function that encrypts file access communication but not the actual files.
SMB encryption can be enabled or disabled with ETERNUS Web GUI or ETERNUS CLI. Encryption is enabled for
sessions that are established after enabling the encryption setting.

■

Large MTU

The Maximum Transmission Unit (MTU) for communication using SMB3.0 can be extended from 64KB to
1,024KB. This enables effective utilization of the network bandwidth.
Large MTU is automatically enabled for communications that use SMB3.0. Changing the enable/disable setting
is not possible.

4. NAS Functions

Supported Protocols 

161

Design Guide

Содержание ETERNUS DX S5 Series
















































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ETERNUS DX S5 Series

iDiskk mini Instruction Manual preview
mini
Бренд: iDiskk Страницы: 11
Tandberg Data StorageLoader DLT VS160 Quick Installation Manual preview
StorageLoader DLT VS160
Бренд: Tandberg Data Страницы: 13
Tandberg Data StorageLoader DLT VS160 Installation And Operation Manual preview
StorageLoader DLT VS160
Бренд: Tandberg Data Страницы: 46
Tandberg Data StorageLibrary LTO-3 SCSI Quick Start Manual preview
StorageLibrary LTO-3 SCSI
Бренд: Tandberg Data Страницы: 2
Tandberg Data SDLT220-320 INTEGRATION Product Manual preview
SDLT220-320 INTEGRATION
Бренд: Tandberg Data Страницы: 142
Tandberg Data RDX QuikStor Quick Start preview
RDX QuikStor
Бренд: Tandberg Data Страницы: 3
Tandberg Data Magnum 224 Instructions Manual preview
Magnum 224
Бренд: Tandberg Data Страницы: 12
Rosewill RX343-S BLK/SLV User Manual preview
RX343-S BLK/SLV
Бренд: Rosewill Страницы: 2
Addonics Technologies AEIDMD4U2 Installation Manual preview
AEIDMD4U2
Бренд: Addonics Technologies Страницы: 2
Seagate ST3120025ACE Installation Manual preview
ST3120025ACE
Бренд: Seagate Страницы: 2
Jimmy at work SPR10004 Owner'S Manual preview
SPR10004
Бренд: Jimmy at work Страницы: 25
Impediment RS-1600-X24 User Manual preview
RS-1600-X24
Бренд: Impediment Страницы: 256
Suncast Brilliant by Design Deck Box DB7000 Owner'S Manual preview
Brilliant by Design Deck Box DB7000
Бренд: Suncast Страницы: 12
Seagate Barracuda 36ES2 ST318418N Installation Manual preview
Barracuda 36ES2 ST318418N
Бренд: Seagate Страницы: 2
INOVU CHROME BOX 2.5 L User Manual preview
CHROME BOX 2.5 L
Бренд: INOVU Страницы: 30
garofalo BAULE WOODY GREY 80 User Manual preview
BAULE WOODY GREY 80
Бренд: garofalo Страницы: 16
Craftsman 65088 Owner'S Manual & Assembly Manual preview
65088
Бренд: Craftsman Страницы: 56
NetApp E-Series 3040 40U Manual preview
E-Series 3040 40U
Бренд: NetApp Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды