Fujitsu ETERNUS DX Disk, Руководство по настройке

Страница: 75 / 85

4.3.1 Creating a WWN Instance Management Table for the Server
Create a "WWN instance management table for the server" with information regarding the Fibre Channel
card.
Determine the following information for each Fibre Channel card installed in the server and enter it into a
copy of the "WWN instance management table for the server". (found in
"Appendix A Various Management
Table Templates" (page 82) ).
• Physical slot name
•
WWN
•
Number of the target controller connected to the Fibre Channel card
•
Instance name
• Physical path name
WWN Instance Management Table for the Server
Physical slot name WWN Controller number Instance name Physical path name
1
Check the instance names.
"bfa + instance number" is the format used to represent Fibre Channel card instance names.
The instance number that corresponds to the physical path in which the Fibre Channel card is installed
is stored in the "/etc/path_to_inst" file at Fibre Channel card driver installation. Extract the necessary
lines using the "grep" command.
# grep "bfa" /etc/path_to_inst
Example:
# grep "bfa" /etc/path_to_inst
"/pci@7c0/pci@0/pci@8/bfa@0" 0 "bfa"
"/pci@7c0/pci@0/pci@8/bfa@0,1" 1 "bfa"
The underlined portion "/pci@7c0/pci@0/pci@8/bfa@0,1" indicates the physical path name, and "1" in-
dicates the instance number.
2
Enter the results in "Instance name" and "Physical path name" columns of the "WWN instance manage-
ment table for the server".
Example:
Physical slot
name
WWN
Controller num-
ber
Instance name Physical path name
bfa0 /pci@7c0/pci@0/pci@8/bfa@0
bfa1 /pci@7c0/pci@0/pci@8/bfa@0,1
Chapter 4 Operations When Using Brocade Fibre Channel Cards
4.3 Setting Up the Server
75
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
Copyright 2017 FUJITSU LIMITED
P3AM-6312-18ENZ0