Fujitsu ETERNUS DX Disk, Руководство по настройке

Страница: 33 / 85

4
Add the results in the "WWN instance management table for the server".
Example:
Physical slot name WWN Instance name Physical path name
10000000c9366046 lpfc0 /pci@9,600000/lpfc@1
10000000c9365d9e lpfc1 /pci@9,600000/lpfc@2
2.3.2 Creating a WWN Instance Management Table for Storage System
Create a "WWN instance management table for storage system" that summarizes information relating to CA
in the ETERNUS DX/AF storage systems.
WWN Instance Management Table for Storage System
Channel Adapter WWN T_ID
Check the following items and enter them in the WWN instance management table for storage system.
• Channel Adapter
CA name in the ETERNUS DX/AF storage systems
•
WWN
The WWN for each CA in the ETERNUS DX/AF (check using ETERNUSmgr)
• T_ID
The SCSI target ID (decimal value) that is to be defined for each CA
For switch connections, the SCSI target ID is irrelevant to the physical protocol, however it must be defined
as a Solaris OS SCSI driver setting. Values matched to the server environment and connection state of the
devices must be set beforehand.
It is recommended to set the same target ID to CAs that configures a multipath.
(Example) When there are two ports on the ETERNUS DX/AF storage systems:
Channel Adapter WWN Alias name T_ID
CM0CA0Port0 202000e000cb0001 DX400_CM0CA0P0 16
CM1CA0Port0 203000e000cb0001 DX400_CM1CA0P0 16
Chapter 2 Setup Procedure for Emulex Fibre Channel Cards
2.3 Setting Up the Server
33
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
Copyright 2017 FUJITSU LIMITED
P3AM-6312-18ENZ0