![background image](http://html.mh-extra.com/html/fujitsu/eternus-dx-disk/eternus-dx-disk_configuration-manual_120951069.webp)
3.5.1.2
/kernel/drv/qla2300.conf Example
The following example is for an ETERNUS DX8100/DX8400/DX8700 switch connection.
# Copyright (C) QLogic Corporation 1996-2008. All rights reserved.
#
# File is setup as the default parameters for all adapters in the
# system.
# If a parameter needs to be changed for a particular adapter,
# make a copy of the parameter. Then change the hba number
# (decimal) in the parameter to match the adapter instance number
# that is displayed during the boot process. Now alter the
# parameter for the adapter.
#
# example:
# Setting loop down timeout for adapter instance 3 and 4
# respectively.
#
# Before:
# hba0-link-down-timeout=60;
#
# After:
# hba0-link-down-timeout=60;
# hba3-link-down-timeout=120;
# hba4-link-down-timeout=240;
#
#
# ===============================
# Target Persistent Name Binding
# ===============================
#
# Note: This persistent binding section only applies if the string
# "qla-mp-config-required" does NOT exist. This string refects
# the fact that the GUI or CLI utilities have made alternate
# persistent binding entries which override the manual persistent
# binding entries documented in this section.
#
# The Persistent Name Binding support for target devices associates a
# SCSI target ID to a specified device World Wide Port Name. In other
# words, this entry changes the target ID of the specified device
# to the number specified in the entry.
#
# To enable it, lines of the following format should be added
# in the qla2300.conf file:
#
# hba<#>-SCSI-target-id-<#>-fibre-channel-port-name="<device WWPN>";
hba0-SCSI-target-id-16-fibre-channel-port-name="2150000b5d6a0109";
hba1-SCSI-target-id-16-fibre-channel-port-name="2151000b5d6a0109";
#
# For example, to associate the following WWPN with target ID 2
# on adapter instance 1, the entry will be:
#
# hba1-SCSI-target-id-2-fibre-channel-port-name="2100002037004ac9";
#
# *******
# IMPORTANT
# *******
#
# - Unlike other parameter entries in the qla2300.conf file, values
# indicated in persistent name binding entries for instance 0 does
# not apply to other instances when there are no entries for the
# other instances.
# - Persistent Name Binding entries are optional entries in the
# qla2300.conf file. These entries do not dictate which devices
# are scanned by the driver, and do not perform any device masking,
# unless the "Persistent Binding Only Option" is set. Absence of
# this entry for any given device name or SCSI ID does not direct
# the driver to perform any type of device masking, unless the
# "Persistent Binding Only Option" is set.
#
# - For target devices, if no Persistent Name Binding entries are
# specified, the default SCSI target IDs assigned will be the loop
# ID of the devices, if failover is disabled else will start at 0.
# Please refer to the FAQ section for which default SCSI target IDs
# are assigned to fabric devices.
#
# ***********************
# CAUTION CAUTION CAUTION
# ***********************
#
For both direct connections and switch connections, add these settings.
Chapter 3 Setup Procedure for QLogic Fibre Channel Cards
3.5 Required Driver Parameters
69
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
Copyright 2017 FUJITSU LIMITED
P3AM-6312-18ENZ0
Содержание ETERNUS DX Disk
Страница 2: ...This page is intentionally left blank ...
Страница 85: ......