Fujitsu eternus af, Руководство по настройке

Страница: 24 / 43

-
Example:
Setting "leg_mpath_enable" to "false"
# scsimgr save_attr -D /dev/rdisk/diskX -a leg_mpath_enable=false
Execute this "leg_mpath_enable" setting command for all LUNs in the ETERNUS AF/DX.
9.2 Multipath Configuration Using Native Multipath
"Native Multipaths" is an OS function available for HP-UX11iv3 onwards.
Native Multipaths can be used to set the I/O load balance policy (load_bal_policy) and enable ALUA
(alua_enabled).
Perform these settings to match the ETERNUS AF/DX model and depending on whether the OS supports
ALUA.
9.2.1 Setting the I/O Load Balance Policy (load_bal_policy)
Set the I/O load balance policy to match the ETERNUS AF/DX model being used as shown below. The policy
setting is required for all LUNs in the ETERNUS AF/DX.
•
I/O load balance policy setting vs ETERNUS AF/DX model
ETERNUS AF/DX model I/O load balance policy setting
ETERNUS DX60 S2 preferred_path
Models other than the above round_robin
•
Example procedure of I/O load balance policy setting
-
Setting the I/O load balance policy to "round_robin"
# scsimgr save_attr -D /dev/rdisk/disk25 -a load_bal_policy=round_robin
Execute this "load_bal_policy" setting command for all LUNs in the ETERNUS AF/DX.
If the I/O load balance policy is "preferred_path", a priority path must be set. Set the path that is used
when the I/O load is balanced as the priority path.
•
Example procedure priority path setting
-
Specify the hardware path of the "Lunpath" that is to be the priority path.
# scsimgr save_attr -D /dev/rdisk/disk25 -a preferred_path=
0/3/1/1.0x2041000b5d6a0109.0x0
Lunpath hardware paths can be checked using the "ioscan -m lun" and "scsimgr lun_map" commands.
The desired priority Lunpath hardware path will contain the ETERNUS AF/DX storage system's Fibre Chan-
nel port WWN.
-
Lunpath hardware path format
HBA_hardware_path. ETERNUS AF/DX_Fibre_Channel_port_WWN. LUN
Chapter 9 Setting the Multipaths
9.2 Multipath Configuration Using Native Multipath
24
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for HP-UX
Copyright 2020 FUJITSU LIMITED
P3AM-3772-22ENZ0