manualshive.com logo in svg

Fujitsu eternus af, Руководство по настройке

Поделиться
Скачать
Fujitsu eternus af Скачать руководство пользователя страница 37

Chapter 12

Non-disruptive Storage Migration

This chapter describes the procedures for connecting and disconnecting paths and provides notes for when
the Non-disruptive Storage Migration function is used in the example Native Multipath environment that
runs HP-UX 11iv3.

■

Connecting Paths

The following procedure shows how to add a path to the migration destination storage system from the serv-
er (HP-UX 11iv3) after the migration destination storage system is connected.

1

Check the multipath status.
Check the added LUNs.

[Thu Aug 03 19:48:30 rx28001:/] ioscan -kfnNC lunpath
Class     I  H/W Path  Driver S/W State   H/W Type     Description
==================================================================
lunpath   0  0/0/0/1/0/0/0.0x0.0x0                                        eslpt   CLAIMED     LUN_PATH     LUN path for ctl0
lunpath   1  0/0/0/1/0/0/0.0x0.0x1000000c0000000                          eslpt   CLAIMED     LUN_PATH     LUN path for disk4
lunpath   2  0/0/0/1/0/0/0.0x0.0x1010000c0000000                          eslpt   CLAIMED     LUN_PATH     LUN path for disk5
lunpath   3  0/0/0/1/0/0/0.0x0.0x1020000c0000000                          eslpt   CLAIMED     LUN_PATH     LUN path for disk6

lunpath  39  0/0/0/7/0/0/0/5/0/0/0.0x2048000b5d6a0ba0.0x0                 eslpt   CLAIMED     LUN_PATH     LUN path for ctl7
lunpath  40  0/0/0/7/0/0/0/5/0/0/0.0x2048000b5d6a0ba0.0x4000000000000000  eslpt   CLAIMED     LUN_PATH     LUN path for disk76
lunpath  41  0/0/0/7/0/0/0/5/0/0/0.0x2048000b5d6a0ba0.0x4001000000000000  eslpt   CLAIMED     LUN_PATH     LUN path for disk77
lunpath  42  0/0/0/7/0/0/0/5/0/0/0.0x2048000b5d6a0ba0.0x4002000000000000  eslpt   CLAIMED     LUN_PATH     LUN path for disk78
lunpath  43  0/0/0/7/0/0/0/5/0/0/0.0x2048000b5d6a0ba0.0x4003000000000000  eslpt   CLAIMED     LUN_PATH     LUN path for disk79
lunpath  44  0/0/0/7/0/0/0/5/0/0/0.0x2048000b5d6a0ba0.0x4004000000000000  eslpt   CLAIMED     LUN_PATH     LUN path for disk80
lunpath  46  0/0/0/7/0/0/0/5/0/0/0.0x2048000b5d6a0ba0.0x4005000000000000  eslpt   CLAIMED     LUN_PATH     LUN path for disk81
lunpath  47  0/0/0/7/0/0/0/5/0/0/0.0x2048000b5d6a0ba0.0x4006000000000000  eslpt   CLAIMED     LUN_PATH     LUN path for disk82
lunpath  48  0/0/0/7/0/0/0/5/0/0/0.0x2048000b5d6a0ba0.0x4007000000000000  eslpt   CLAIMED     LUN_PATH     LUN path for disk83
lunpath  45  0/0/0/8/0/0/0/5/0/0/0.0x2049000b5d6a0ba0.0x0                 eslpt   CLAIMED     LUN_PATH     LUN path for ctl7
lunpath  49  0/0/0/8/0/0/0/5/0/0/0.0x2049000b5d6a0ba0.0x4000000000000000  eslpt   CLAIMED     LUN_PATH     LUN path for disk76
lunpath  50  0/0/0/8/0/0/0/5/0/0/0.0x2049000b5d6a0ba0.0x4001000000000000  eslpt   CLAIMED     LUN_PATH     LUN path for disk77
lunpath  51  0/0/0/8/0/0/0/5/0/0/0.0x2049000b5d6a0ba0.0x4002000000000000  eslpt   CLAIMED     LUN_PATH     LUN path for disk78
lunpath  52  0/0/0/8/0/0/0/5/0/0/0.0x2049000b5d6a0ba0.0x4003000000000000  eslpt   CLAIMED     LUN_PATH     LUN path for disk79
lunpath  53  0/0/0/8/0/0/0/5/0/0/0.0x2049000b5d6a0ba0.0x4004000000000000  eslpt   CLAIMED     LUN_PATH     LUN path for disk80
lunpath  54  0/0/0/8/0/0/0/5/0/0/0.0x2049000b5d6a0ba0.0x4005000000000000  eslpt   CLAIMED     LUN_PATH     LUN path for disk81
lunpath  55  0/0/0/8/0/0/0/5/0/0/0.0x2049000b5d6a0ba0.0x4006000000000000  eslpt   CLAIMED     LUN_PATH     LUN path for disk82
lunpath  56  0/0/0/8/0/0/0/5/0/0/0.0x2049000b5d6a0ba0.0x4007000000000000  eslpt   CLAIMED     LUN_PATH     LUN path for disk83

lunpath   4  0/0/0/31/2.0x0.0x0                                           eslpt   CLAIMED     LUN_PATH     LUN path for disk7
[Thu Aug 03 19:48:43 rx28001:/]

2

Connect the multipath.
Add the host affinity setting to the migration destination storage system.

3

Rescan the device.

[Thu Aug 03 20:00:51 rx28001:/] ioscan

37

FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for HP-UX

Copyright 2020 FUJITSU LIMITED

P3AM-3772-22ENZ0

Содержание eternus af












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды