manualshive.com logo in svg

Fujitsu ESPRIMO Q1500, Руководство по эксплуатации

Поделиться
Скачать
Fujitsu ESPRIMO Q1500 Скачать руководство пользователя страница 23

Operation

 

16 

A26361-K1001-Z220-1-7619, Edition 8 

Power indicator 

The power indicators are on the front of the casing.  

1

 
1 = Power indicator 
 

●

 

The LED at the ON/OFF switch glows white: 
The device is switched on. 

●

 

The LED at the ON/OFF switch flashes white: 
The device is switched on, the fixed disk or the optical drive is being accessed. 

●

 

The LED at the ON/OFF switch does not glow: 
The device is in energy-saving mode. After being switched on with the ON/OFF switch, the 
device powers up or returns to the state it was in before it entered energy-saving mode. 

 

!

 

In energy-saving mode the device must not be switched off with the main power 
switch (if present) or disconnected from the mains, as this may result in data loss. 

 

●

 

The LED at the ON/OFF switch does not glow: 
The device is switched off (disconnected from the mains) or is ready for use. If the device is 
ready it can be enabled with the ON/OFF switch. 

Содержание ESPRIMO Q1500










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды