manualshive.com logo in svg

Fujitsu DESKPOWER N300 Series, Руководство пользователя, Страница: 54 / 61

Поделиться
Скачать
Fujitsu DESKPOWER N300 Series Скачать руководство пользователя страница 54

39

■

Installing or Removing the Hard Disk Drive

Open the casing (see “Opening the casing” chapter).

The EasyChange rails for a second hard disk are in the slot for the second hard disk.

Installing a hard disk drive

Take the new hard disk drive out of its packaging.

Make the required settings on the drive (e.g. Master/Slave/CableSelect).

Secure the EasyChange rails on the side of the hard disk by inserting the upper pins of the

EasyChange rail in the corresponding holes of the hard disk.

Push the hard disk drive into the casing (1) until the EasyChange rails engage.

 Connect the data and power supply cables to the hard disk drive or to the hard disk drives.

Connect the blue plug of the data cable to the connection on the mainboard. Connect the plug on the
other end to the hard disk drive.

Close the casing (see “Closing the casing” chapter).

It may be necessary to modify the entry for the drive in the BIOS Setup.

1

CAPTOWN (27-42)

11/6/02, 6:56 PM

39

Содержание DESKPOWER N300 Series






























































Отзывы:

Нет отзывов