Fujitsu DESKPOWER N300 Series Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 61

Fujitsu DESKPOWER N300 Series Скачать руководство пользователя страница 37

22

1 Troubleshooting and Tips

CAUTION

Take careful note of the safety warnings and in the “Preparing for Use” chapter, when you connect
or disconnect cables.

If a fault occurs, try to correct it as described:

in this chapter

in the documentation of the connected devices

in the help systems of the software used.

If you fail to correct the problem, proceed as follows:

Switch the PC off.

Make a note of the steps and the circumstances that led to the fault.

Make a note of any error messages displayed.

Note the ID number of your device.

Contact your sales outlet or our customer service centre.

■

Installing New Software

When installing programmes or drivers, important files may be overwritten and modified. To be able

to access the original data in the event of any problems following installation, you should backup your

hard disk prior to installation.

■

Power-on Indicator Remains Unlit After You Have

Switched on Your Device

This may be due to the following:

The mains voltage supply is faulty

Check that the power cable is plugged properly into the system unit and grounded mains outlet.

Switch the PC on at the power switch.

Internal power supply overloaded

Disconnect the power cable of the system unit from the grounded mains outlet.

Wait for a moment.

Plug the power cable into the grounded mains outlet again.

Switch the PC on at the power switch.

CAPTOWN (21-26)

11/6/02, 6:49 PM

22

«
...
35
36
37
38
39
...
»

Содержание DESKPOWER N300 Series






























































Отзывы:

Нет отзывов