manualshive.com logo in svg

Fujitsu DESKPOWER N300 Series, Руководство пользователя, Страница: 47 / 61

Поделиться
Скачать
Fujitsu DESKPOWER N300 Series Скачать руководство пользователя страница 47

32

If necessary, connect the cables.

Close the casing (see “Closing the casing” chapter).

If you have installed or removed a PCI board, please check the relevant PCI slot settings in the BIOS Setup. If
necessary, change the settings. Further information is provided in the PCI board documentation. The two outer
slots are suitable for low-profile cards with an adapter.

■

Removing a board

Open the casing (see “Opening the casing” chapter).

Disconnect the cables connected to the board.

Press on the Flexy slot lever in the direction of the arrow (1), unhook it and swing it up in the direction
of the arrow (2).

Pull the board out of the slot (3).

For cooling, protection against fire, and in order to comply with EMC (electromagnetic
compatibility) regulations, you must refit the cover plate.

Push the rear slot cover plate into the slot (4). Ensure that the point of the cover engages on the
outside of the casing.

Close the Flexy slot lever (5) and press on it in the direction of the arrow (6) until it engages.

Close the casing (see “Closing the casing” chapter).

1

2

5

6

3

4

CAPTOWN (27-42)

11/22/02, 3:45 PM

32

Содержание DESKPOWER N300 Series






























































Отзывы:

Нет отзывов