Fujitsu DESKPOWER 6000 Series Скачать руководство пользователя страница 67

Страница: 67 / 105

– Wake up LAN

This item sets whether to turn on the computer or to return from Suspend mode when a
magic packet is received from the standard LAN port.

Disabled (Initial value)
The computer is not turned on or returned from Suspend mode after receiving a
magic packet.

Enabled
The computer is turned on or returned from Suspend mode after receiving a magic
packet.

- This item is not available when Windows 98 runs in ACPI mode.
- For PME LAN cards (PCIs), use ‘Wake up on PCI PME.’

– Wake up on Modem Ring

This item sets whether to turn on the computer or to return it from Suspend mode when a
call terminates on the modem (connected to a serial port).

Disabled (Initial value)
The computer is not turned on or returned from Suspend mode when a call
terminates on the modem.

Enabled
The computer is turned on or returned from Suspend mode when a call terminates
on the modem.

- This item is not available when Windows 98 runs in ACPI mode.
- For PME LAN cards (PCIs), use ‘Wake up on PCI PME.’

– Wake up on PCI PME

This item sets whether to turn on the power or to return it from Suspend mode when a
PCI extension card issues a PME signal.

Disabled (Initial value)
The computer is not turned on or returned from Suspend mode when a PME signal
is issued.

Enabled
The computer is turned on or returned from Suspend mode when a PME signal is
issued.

This item is not available when Windows 98 runs in ACPI mode.

Point

Содержание DESKPOWER 6000 Series










































































































Результаты поиска

Содержание DESKPOWER 6000 Series

Отзывы:

Похожие инструкции для DESKPOWER 6000 Series

Бренды по названию

Популярные бренды

Fujitsu DESKPOWER 6000 Series, Руководство пользователя

Результаты поиска

Содержание DESKPOWER 6000 Series

Отзывы:

Похожие инструкции для DESKPOWER 6000 Series

Бренды по названию

Популярные бренды