Fujitsu D3071, Краткое описание

Страница: 22 / 24

6 - English Installing/removing the processor
Procedure
The processor socket is covered with a protective cap to protect the spring
contacts. In the event of a warranty case, the mainboard can only be taken back
by Fujitsu Technology Solutions with the protective cap secured!
a
b
b
► Remove the heat sink.
► Press down the lever and unhook it.
► Fold up the frame.
► Hold the processor between your thumb
and index
fi nger and insert it into the socket
(b) so that the marking of the processor is
aligned with the marking on the socket (a).
► Press the lever downward until it is
hooked in again.
► Remove the protective cap and keep it.
Please note that, depending on the heat sink used, different heat sink
mounts are required on the mainboard.
► Depending on the con fi guration variant, you must pull a protective foil off the heat sink
or coat the heat sink with heat conducting paste before fi tting it.
► Secure the heat sink - depending on the model - with four screws or push it into the mounts.
18 Fujitsu Technology Solutions