Fujitsu CELSIUS W410, Руководство по эксплуатации

Страница: 42 / 62

System expansions
Installing an accessible drive
► Open the casing (see "Opening the casing", Page 35 ).
► If you are installing the drive in the upper bay and a cover (optional) is
already in place, please remove it.
or
► If you are installing the drive in the lower bay and a cover (optional) is
already in place, please remove it.
► Break out the pre-stamped metal cover on the drive bay.
► Fit the drive cover for the 5
1
/
4
inch drive (see "Fitting the drive cover for
the 5
1
/
4
inch drive", Page 37 ).
Do not throw away the cover. For cooling and protection against fi re you must re fi t the
cover if you remove the drive again later (see "Removing an accessible drive", Page 39 ).
1
► Slide the accessible drive into the casing until it snaps in place (1).
► Connect the cables to the drive. Make sure the polarity is correct.
► Close the casing (see "Closing the casing", Page 36 ).
It may be necessary to modify the entry for the drive in the BIOS Setup .
38 Fujitsu Technology Solutions