BX630 S2
Operating Manual
23
4
Installing the Hardware
V
CAUTION!
Make sure you observe the safety notes in the chapter
Important notes
.
The server blade must not be exposed to extreme environmental condi-
tions (see
“Ambient conditions” on page 14
). It must be protected from
dust, humidity and heat.
4.1
Installation Steps
The installation steps are described in detail in the following sections of this
chapter:
●
Unpacking the system ( see
4.2 on page 23
).
●
Installing the server blade in the basic unit (see
4.3 on page 24
).
●
Connecting the server blade (see
4.4 on page 28
).
4.2
Unpacking the Server Blade
V
CAUTION!
Make sure you observe the safety notes in the
chapter “Important notes”
on page 17
starting on
page 17
.
Unpack the server blade only at the place where you want to set it up.
Keep the original packaging of the server blade. You may need it for future
transport.
Ê
Unpack all the individual parts.
Ê
Check the delivery for damage sustained during transport.
Ê
Check that the delivery corresponds to the specifications in the delivery
note.
The type label is located at the front right on the underside of the server blade.
If the delivery is damaged or does not match the delivery note, contact your
supplier immediately!
