En-11
ADJUSTING THE DIRECTION OF AIR CIRCULATION
SWING OPERATION
Begin air conditioner operation before performing this procedure.
To select SWING Operation
Press the SWING button
The SWING indicator will light.
In this mode, the air
fl
ow direction louvers will swing automatically to direct the air
fl
ow
both up and down.
To stop SWING Operation
Press the SWING button once again.
The SWING indicator will go out.
Air
fl
ow direction will return to the setting before swing was begun.
●
Attempting to move up/down air direc-
tion flaps manually could result in im-
proper operation; in this case, stop op-
eration and restart. The louvers should
begin to operate properly again.
●
When used in a room with infants, chil-
dren, elderly or sick persons, the air
direction and room temperature should
be considered carefully when making
settings.
Vertical Air Direction Adjustment
Press the SET button (Vertical).
Each time the button is pressed, the air direction range will change as follows:
1
2
3
4
The remote controller’s display
does not change.
Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).
Begin air conditioner operation before performing this procedure.
Air
fl
ow direction setting:
1
,
2
,
3
,
4
: During cooling/heating/dry mode
●
The vertical air
fl
ow direction is set automatically as shown, in accordance with the
type of operation selected.
During cooling/dry mode
: Horizontal
fl
ow
1
During heating mode *
: Downward
fl
ow
4
●
During AUTO mode operation, for the
fi
rst minute after beginning operation, air
fl
ow
will be horizontal
1
; the air direction cannot be adjusted during this period.
Horizontal Air Direction Adjustment
The function cannot be used.
About SWING Operation
The type of operation
Range of swing
Cooling/Heating/Dry/Fan
1
to
4
The SWING operation may stop temporarily when the air conditioner’s
fan is not operating, or when operating at very low speeds
OM 01_9374379712-02 EN.indd 11
OM 01_9374379712-02 EN.indd 11
1/22/2559 BE 21:37
1/22/2559 BE 21:37
