4
Fig. 5 Remote Control Unit
B
SLEEP button
C
MASTER CONTROL button
D
SET TEMP./SET TIME buttons (
)
E
Signal Transmitter
F
TIMER button
G
FAN CONTROL button
H
START/STOP button
I
AIR FLOW DIRECTION SET button
J
AIR FLOW DIRECTION SWING button
K
TIME ADJUST button
L
ACL button
Rear side (Fig. 6)
M
TEST RUN
●
Touch the two metal contacts with a me-
tallic object to send the signal to perform
a test run.
●
Perform a test run only when installing the
air conditioner. If the signal to perform a
test run is received during normal opera-
tion, the air conditioner’s thermostat will
malfunction.
●
If the signal to perform a test run is re-
ceived during normal operation, the unit
will switch to the test operation mode and
the indoor unit’s OPERATION and TIMER
indicator lamps will flash simultaneously.
●
To stop the test operation mode, press the
START/STOP button to stop the air condi-
tioner.
N
Remote Control Unit Display (Fig. 7)
O
Transmit Indicator
P
Clock Display
Q
Operating Mode Display
R
T imer Mode Display
S
Fan Speed Display
T
Temperature Set Display
U
T imer Set Indicator
V
Temperature Set Indicator
Fig. 1 Indoor Unit
1
Air Filter
2
Horizontal Louvers
3
Indicator Lamps (Fig. 2)
4
SWING Indicator Lamp (orange)
Lights during use of the SWING.
5
TIMER Indicator Lamp (green)
Lights during use of the ON timer, OFF timer,
PROGRAM timer, and SLEEP timer.
6
OPERATION Indicator Lamp (red)
●
Lights when unit is in operation.
●
Flashes quickly for about one second when
a signal is received from the remote con-
trol unit.
[When the OPERATION indicator and TIMER
indicator flash alternately, it means that the
power has been interrupted due to a power
failure, etc.]
7
Remote Control Signal Receiver
8
MANUAL AUTO Button
9
Air Intake Grille
Fig. 3 Outdoor Unit
;
Intake Port
A
Outlet Port
