background image

En-2

OPERATING MANUAL

1  Intake grille

Before starting operation, make sure that the intake grille has been 

shut completely. Incomplete closing might have an effect on the 

proper working or performance of the product.

2  Manual AUTO button

Use when you lost the remote controller or remote control malfunction 

occurs.

Status

Action

Mode or operation

In operation

Press more than 3 seconds.

Stop

Stopping

Press more than 3 seconds and 

less than 10 seconds.

AUTO

Press more than 10 seconds.

(Only for servicing.*)

Forced cooling

After cleaning

Press less than 3 seconds.

Filter indicator reset

*:To stop forced cooling, press this button or START/STOP button on 

the remote controller.

3  Front panel

4  Vertical airflow direction louver

Each time you press SET button on the remote controller, the angle 

of the vertical airflow direction louver moves as follows:

1

2

3

7

6

5

*

*

4

COOL or DRY mode

HEAT mode

1

2

3

4

5 6

7

*: Default setting in each mode.

• Do not adjust by hand.

• At the beginning of AUTO or HEAT mode, they may stay position 1 

for a while for adjustment.

• If you set the angle to position 5–7 for more than 30 minutes in 

COOL or DRY mode, they automatically return to position 4.

  In COOL or DRY mode, if the angle is set to position 5–7 for many hours, 

condensation may be formed, and the drips may wet your property.

5  Drain hose

6  Remote control signal receiver

CAUTION

For appropriate signal transmission between remote controller and 

the indoor unit, keep the signal receiver away from following items:

 -Direct sunlight or other strong light

 -Flat-panel television screen

In rooms with instantaneous fluorescent lights, such as in-

verter type ones, the signal may not be transmitted properly. In 

such a case, consult the store that you purchased the product.

7  ECONOMY indicator (green)

Lights in ECONOMY operation.

8  TIMER indicator (orange)

Lights in TIMER operation, and blinks slowly when the timer setting 

error is detected.

As for the timer setting error, refer to “Auto-restart function” on page 4.

9  OPERATION indicator (green)

Lights in normal operation, and blinks slowly in automatic defrosting 

operation.

10  Horizontal airflow direction louvers

CAUTION

Before you adjust the horizontal airflow direction, make sure that 

the vertical airflow direction louver has been stopped completely.

Adjust two knobs by hand.

11

1

2

3

4

5

10

7

8

9

6

See page 5

11  Air filter

Easy-to-care air filters resist mildew growth.

Indoor unit accessories

Remote controller

Batteries

WARNING

Take care to prevent infants and small children from acciden-

tally swallowing the batteries.

Battery (AAA/R03/LR03 × 2) loading

Notes:

• Use specified type of battery only.

• Do not use new battery and used battery together.

• Batteries can be used about 1 year in ordinary use.

• If the remote control range noticeably got shorten, replace the 

batteries, and press RESET button.

1

2

3

Indoor Unit Overview and Operations

Содержание asyg35llcr









Отзывы: