En-1
Contents
1. SAFETY
PRECAUTIONS
.................................................................. 1
1.1. IMPORTANT! Please read before starting .................................. 1
1.2. Special precautions .................................................................... 1
2. PRODUCT
SPECIFICATION
............................................................. 2
2.1. Precautions for using R410A refrigerant ..................................... 2
2.2. Installation tools .......................................................................... 2
2.3. For authorized service personnel only. ....................................... 2
2.4. Accessories ................................................................................ 2
2.5. Pipe requirement ........................................................................ 2
2.6. Electrical requirement ................................................................. 3
2.7. Optional parts ............................................................................. 3
3. INSTALLATION
WORK
..................................................................... 3
3.1. Selecting an installation location ................................................ 3
3.2. Removing and replacing parts .................................................... 4
3.3. Pipe installation .......................................................................... 4
3.4. Electrical wiring ........................................................................... 6
3.5. Remote controller installation ..................................................... 7
4. OPTIONAL INSTALLATION WORK .................................................. 8
4.1. Optional kit installation ................................................................ 8
5. FUNCTION
SETTING........................................................................ 8
5.1. Function details .......................................................................... 9
5.2. Temperature correction ............................................................... 9
6. TEST
RUN
....................................................................................... 10
7. FINISHING
...................................................................................... 10
8. CUSTOMER
GUIDANCE
................................................................ 10
9. ERROR
CODES
...............................................................................11
1. SAFETY PRECAUTIONS
1.1. IMPORTANT! Please read before starting
This air conditioning system meets strict safety and operating standards.
As the installer or service person, it is an important part of your job to install or service the
system so it operates safely and ef
fi
ciently.
For safe installation and trouble-free operation, you must:
• Carefully read this instruction booklet before beginning.
• Follow each installation or repair step exactly as shown.
• Observe all local, state, and national electrical codes.
• Pay close attention to all warning and caution notices given in this manual.
WARNING
This symbol refers to a hazard or unsafe practice which can
result in severe personal injury or death.
CAUTION
This symbol refers to a hazard or unsafe practice which can
result in personal injury and the potential for product or prop-
erty damage.
• Hazard alerting symbols
Electrical
Safety/alert
If Necessary, Get Help
These instructions are all you need for most installation sites and maintenance conditions.
If you require help for a special problem, contact our sales/service outlet or your certi
fi
ed
dealer for additional instructions.
In Case of Improper Installation
The manufacturer shall in no way be responsible for improper installation or maintenance
service, including failure to follow the instructions in this document.
1.2. Special precautions
When Wiring
ELECTRICAL SHOCK CAN CAUSE SEVERE PERSONAL INJURY OR DEATH. ONLY A
QUALIFIED, EXPERIENCED ELECTRICIAN SHOULD ATTEMPT TO WIRE THIS SYS-
TEM.
• Do not supply power to the unit until all wiring and tubing are completed or reconnected
and checked.
• Highly dangerous electrical voltages are used in this system. Carefully refer to the wir-
ing diagram and these instructions when wiring. Improper connections and inadequate
earthing (grounding) can cause accidental injury or death.
• Earth (Ground) the unit following local electrical codes.
• Connect all wiring tightly. Loose wiring may cause overheating at connection points and
a possible
fi
re hazard.
When Transporting
Be careful when picking up and moving the indoor and outdoor units. Get a partner to
help, and bend your knees when lifting to reduce strain on your back. Sharp edges or thin
aluminum
fi
ns on the air conditioner can cut your
fi
ngers.
When Installing...
...In a Ceiling or Wall
Make sure the ceiling/wall is strong enough to hold the unit’s weight. It may be necessary
to construct a strong wood or metal frame to provide added support.
...In a Room
Properly insulate any tubing run inside a room to prevent “sweating” that can cause drip-
ping and water damage to walls and
fl
oors.
...In an Area with High Winds
Securely anchor the outdoor unit down with bolts and a metal frame.
Provide a suitable air baf
fl
e.
...In a Snowy Area (for Heat Pump-type Systems)
Install the outdoor unit on a raised platform that is higher than drifting snow.
When Connecting Refrigerant Tubing
• Keep all tubing runs as short as possible.
• Use
the
fl
are method for connecting tubing.
• Apply refrigerant lubricant to the matching surfaces of the
fl
are and union tubes before
connecting them, then tighten the nut with a torque wrench for a leak-free connection.
• Check carefully for leaks before opening the refrigerant valves.
When Servicing
• Turn the power OFF at the main circuit breaker panel before opening the unit to check
or repair electrical parts and wiring.
• Keep
your
fi
ngers and clothing away from any moving parts.
• Clean up the site after you
fi
nish, remembering to check that no metal scraps or bits of
wiring have been left inside the unit being serviced.
• After installation, explain correct operation to the customer, using the operating manual.
WARNING
• Never touch electrical components immediately after the power supply has been
turned off. Electric shock may occur. After turning off the power, always wait 10 min-
utes before touching electrical components.
• If refrigerant leaks while work is being carried out, ventilate the area. If the refrigerant
comes in contact with a
fl
ame, it produces a toxic gas.
• Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
• Branch box which is speci
fi
ed in this manual is the equipment to support the indoor unit
of multi-connection type.
• All products are manufactured to metric units and tolerances. United States customary
units are provided for reference only. In cases where exact dimensions and tolerances
are required, always refer to metric units.
For authorized service personnel only.
AIR CONDITIONER
Wall Mounted Type
INSTALLATION MANUAL
PART No. 9387603095
English
Français
Español
9387603095_IM.indb 1
9387603095_IM.indb 1
2019/11/18 15:54:54
2019/11/18 15:54:54
