background image

En-3

AIR CONDITIONER Wall Mounted Type

OPERATING MANUAL

1 Intake 

grille

Before starting operation, make sure that the intake grille has been 
shut completely. Incomplete closing may have an effect on the proper 
function or performance of the product.

2  MANUAL AUTO button

Use when the remote controller is lost or there is a malfunction.

Status

Action

Mode or operation

In operation

Press more than 3 seconds.

Stop

Stopping

Press more than 3 seconds and 

less than 10 seconds.

AUTO

Press more than 10 seconds.

(Only for servicing.*)

Forced cooling

After cleaning

Press less than 3 seconds.

Filter indicator reset

*:To stop forced cooling, press this button or START/STOP button on 

the remote controller.

3  Wireless LAN control indicator and buttons

WLAN adapter is build-in for wireless LAN control.
For details, refer to the setting manual of the Wireless LAN control.

NOTES:

• The indicators can be turned off by using the mobile app.

4 Front 

panel

See page 8

5 Human 

Sensor

Used for Energy Saving Program. Controls temperature setting by 
detecting people in the room.

6 Vertical 

air

fl

 ow direction louver

Each time you press SET button on the remote controller, the angle 
of the vertical air

fl

 ow direction louver moves as follows:

1

2

3

4

5

6 7

COOL or DRY mode

HEAT mode

1

2

3

7

6

5

*

*

4

*: Default setting in each mode.

• Do not adjust by hand.
• At the beginning of AUTO or HEAT mode, they may stay on position 

1 for a while for adjustment.

• If the angle is set to position 4–7 for more than 30 minutes in COOL 

or DRY mode, the louver will automatically return to position 3.

•  Keeping the position 4-7 during COOL or DRY mode may cause 

condensation to form, and the drops may damage your property.

7 Power 

diffuser

In conjunction with movement of the vertical air

fl

 ow direction louver, 

the angle of the power diffuser moves as follows:

Vertical air

fl

 ow 

direction louver

Power diffuser

3

7

6

5

4

2

1

3

2

1

4

• In SWING operation, power diffuser does not move.

8 Drain 

hose

9  Remote controller signal receiver

 

CAUTION

For appropriate signal transmission between remote controller and 
indoor unit, keep the signal receiver away from the following items:

 

- Direct sunlight or other strong lights

 

- Flat-panel television screen

In rooms with instantaneous 

fl

 uorescent lights, such as in-

verter type ones, the signal may not be transmitted properly. In 
such a case, consult the store of purchase.

10  ECONOMY indicator (green)

Lights in ECONOMY operation and in 10 °C HEAT operation.

11  TIMER indicator (orange)

Lights in TIMER operation, and blinks slowly when the timer setting 
error is detected.
For details, refer to “Auto-restart function” on page 9.

8

1

4

5

6

7

10

11

12

13

15

2

14

9

3

12  OPERATION indicator (green)

Lights in normal operation, and blinks slowly in Automatic defrosting 
operation.
Blinks during Demand Response operation. For details, refer to page 
8.

13  Horizontal air

fl

 ow direction louvers

 

CAUTION

Before you adjust the horizontal air

fl

 ow direction, make sure that 

the vertical air

fl

 ow direction louver has been stopped completely.

Adjust two knobs by hand.

See page 10

14  Air 

fi

 lter

See page 11

15  Air cleaning 

fi

 lters

Purify or deodorize the air, and provide fresh air

fl

 ow.

Indoor Unit Overview and Operations

9333003283-02_OM_EN.indd   3

9333003283-02_OM_EN.indd   3

2017/11/29   10:24:08

2017/11/29   10:24:08

Содержание ASTG09KMCB













Отзывы: