Fujitsu AS*A07LACH series, Руководство по установке

Страница: 3 / 36

En-3
Name and Shape Q’ty Application
Operating Manual
1
Installation Manual
1
(This book)
Wall hook bracket
1
For indoor unit installation
Binder
1
For remote control cable
binding
Cloth tape
1
For indoor unit installation
Tapping screw
(M4
× 25mm)
8
For wall hook bracket
installation
Wire assebly
1
For wired remote control
installation
Air cleaning filter
2
Air cleaning filter frame
2
Seal A
1
For indoor unit
installation
3. INSTALLATION WORK
Especially, the installation place is very important for the split
type air conditioner because it is very dif
fi cult to move from
place to place after the fi rst installation.
3.1. Selecting an installation location
WARNING
• Select installation locations that can properly support the
weight of the indoor. Install the units securely so that they do
not topple or fall.
CAUTION
• Do not install the unit in the following areas:
• Area with high salt content, such as at the seaside.
It will deteriorate metal parts, causing the parts to fall or
the unit to leak water.
• Area fi lled with mineral oil or containing a large amount
of splashed oil or steam, such as a kitchen.
It will deteriorate plastic parts, causing the parts to fall or
the unit to leak water.
• Area that generates substances that adversely affect the
equipment, such as sulfuric gas, chlorine gas, acid, or
alkali.
It will cause the copper pipes and brazed joints to
corrode, which can cause refrigerant leakage.
• Area that can cause combustible gas to leak, contains
suspended carbon fi bers or fl ammable dust, or volatile
in fl ammables such as paint thinner or gasoline.
If gas leaks and settles around the unit, it can cause a
fi re.
• Area where animals may urinate on the unit or ammonia
may be generated.
• Do not use the unit for special purposes, such as storing
food, raising animals, growing plants, or preserving
precision devices or art objects.
It can degrade the quality of the preserved or stored
objects.
• Do not install where there is the danger of combustible gas
leakage.
• Do not install the unit near a source of heat, steam, or
fl ammable gas.
• Install the unit where drainage does not cause any trouble.
• Install the indoor unit, outdoor unit, power supply cable,
transmission cable, and remote control cable at least 1 m
away from a television or radio receivers. The purpose of this
is to prevent TV reception interference or radio noise.
(Even if they are installed more than 1 m apart, you could still
receive noise under some signal conditions.)
• If children under 10 years old may approach the unit, take
preventive measures so that they cannot reach the unit.
• Decide the mounting position with the customer as
follows:
(1) Install the indoor unit on a place having a suf fi cient strength
so that it withstands against the weight of the indoor unit.
(2) The inlet and outlet ports should not be obstructed; the air
should be able to blow all over the room.
(3) Leave the space required to service the air conditioner.
(4) A place from where the air can be distributed evenly
throughout the room by the unit.
(5) Install the unit where connection to the outdoor unit is easy.