Fujitsu Arrows NX F-01J, Инструкция по эксплуатации

Страница: 68 / 218

Calling
66
･
In Japan, if the docomo nano UIM card is not inserted,
emergency calls 110, 119 and 118 cannot be made on the
PIN code entry screen, during PIN code lock/PUK lock or
while updating software.
･
If you dial 110, 119, or 118 overseas, an emergency call
screen may appear but the call is normally sent.
･
If you make an emergency call with Reject call settings
enabled, Reject call settings will be disabled.
･
For some overseas network operators, VoLTE emergency
call may not be available. In this case, set "Call mode setting"
(
→ P172) to OFF.
･
Emergency call may not be available via some networks.
･
You cannot make emergency call with video call.
◆ International call (WORLD CALL)
Enter "+" to make an international call. Touch and hold [0] to
enter "+".
･
To use overseas, refer to "Outline of international roaming
(WORLD WING)".
→ P170
･
For details of "WORLD CALL", contact "General Inquiries" on
the last page of this manual.
1
From the Home screen, → [Dial] → Touch and
hold [0] → Enter "Country code-Area code (City
code) omitted prefix 0 and phone number
→
･
In some countries and areas such as Italy, "0" is
required.
･
When selecting from the country list to enter "+ country
code", enter the area code (city code) and phone
number,
→
[International call]
→
Select a country
→
[WORLD CALL].
◆
Receiving a voice call
<Example> When a call is received in sleep mode
1
A call is received
The incoming call screen (full-screen) appears.
･
Press
P
/volume key to stop ringtone or vibration.
･
When receiving a call with VoLTE, "HD"/"HD+" is
displayed at the top of the screen. However, depending
on connected network, it may not be displayed.
2
→ [ACCEPT]
Declining call :
→
[REJECT]
Rejecting a call and sending SMS : → [Reject call with
SMS] → Select a message
Recording phone memo : → [Phone memo]
3
When a call is ended, [END CALL]
Receiving a call/video call