En-10
Indoor unit temperature and humidity range
Permissible ranges of temperature and humidity are as follows:
Indoor temperature
Cooling/Dry
[°C]
18.0 to 30.0
Heating
[°C]
16.0 to 30.0
Indoor humidity
[%]
80 or less *
1)
*1) If the air conditioner is used continuously for many hours, water may
condense on the surface and drip.
• If the unit is operated under the conditions except the permissible
temperature range, the air conditioner operation may stop because
of the automatic protection circuit working.
• Depending on the operating conditions, the heat exchanger may
freeze, causing water leakage or other malfunction (in the Cooling
or Dry mode).
Other information
• Do not use the air conditioner for any purpose other than room
cooling/dry, room heating or fan.
• For the permissible ranges of temperature and humidity for the
outdoor unit, refer to the outdoor unit installation manual.
PIN
Google Play is a registered trademark of Google Inc.
App store is a service mark of Apple Inc., registered in the U.S. and
other countries.
Setting to use W-LAN control
Step 1. Application software installation
1.
Open “Google Play” or “App Store” depending on the type
of your smartphone or tablet PC.
2.
Search for “FGLair”.
3.
Install the application software (mobile app) following the
instructions on your screen.
Step 2. User registration
1.
Open the installed mobile app.
2.
Register the user (with either a smartphone or tablet PC)
by following the instructions in the create an account
section of the mobile app.
Step 3. Installing W-LAN adapter
CAUTION
• Be sure to turn off the power supply of the air
conditioner when installing or removing this product
to avoid the risk of electric shock.
• Do not put
fi
ngers, sticks etc. in the connection part of
this product and the connection slot of the indoor unit.
Otherwise, electric shock or damage to the product
may occur.
• Do not standing on an unstable platform when
installing or removing this product to avoid injury.
1.
Be sure to turn air conditioner off and to disconnect all the
power supply.
2.
Open the intake grille.
3.
Open the W-LAN adapter cover until it snaps.
4.
Plug the W-LAN adapter into the connection slot of the
indoor unit in the direction as shown in the
fi
gure.
Label side
5.
Close the W-LAN adapter cover and the intake grille.
12. OPTIONAL PARTS
12.1. Wired remote controller
The optional wired remote controller can be used.
You can use wired and wireless remote controller together.
However, some functions of the wireless remote controller are restricted.
If you set the restricted functions, beeping sound will be heard, [ ], [ ],
and [ ] indicator on the indoor unit will blink.
<Restricted functions for wireless remote controller>
When using together with wired remote controller (2-wired type)
• Weekly timer operation
• Powerful operation
• Outdoor Unit Low Noise operation
• 10 °C Heat operation
You can use wired remote controller and W-LAN control (optional).
However, some operations from the mobile app are restricted.
Multiple remote controller
You can connect two wired remote controllers to one air conditioner.
Either remote controller can control the air conditioner.
However, the timer functions cannot be used by the secondary unit.
12.2. Group control
One remote controller can control up to 16 air conditioners. All of the air
conditioners will be operated with the same settings.
You cannot use group control and W-LAN control together.
12.3. W-LAN control
NOTES:
If you use the external input/output (optional) , W-LAN control
cannot be used.
For how to operate the mobile app, refer to the operating manual of the
mobile app.
Write down the SSID and the PIN code to the following table.
MAC:
SSID :AP-WF
-
PIN:
W-LAN label
Connection port
Information on W-LAN adapter
SSID
00_9387858037_OM.indb 10
00_9387858037_OM.indb 10
2019/8/26 17:12:04
2019/8/26 17:12:04
