Fujitsu AOTG09KMCA, Дизайн и техническое руководство

Страница: 27 / 43

- (01 - 24) -
WA
L
L
M
O
U
N
T
E
D
T
Y
P
E
AST
G
0
9
-1
2
K
M
C
A
WA
L
L
M
O
U
N
T
E
D
T
Y
P
E
AST
G
0
9
-1
2
K
M
C
A
4) Auto restart
Enable or disable automatic restart after a power interruption.
(  ... Factory setting)
Setting description Function number Setting value
 Enable
40
00
Disable 01
* Auto restart is an emergency function such as for power outage etc.
Do not attempt to use this function in normal operation.
Be sure to operate the unit by remote controller or external device.
5) Room temperature sensor switching
(Only for wired remote controller)
When using the Wired remote controller temperature sensor, change the setting to "Both" (01).
(

... Factory setting)
Setting description Function number Setting value
 Indoor unit
42
00
Both 01
00: Sensor on the indoor unit is active.
01: Sensors on both indoor unit and wired remote controller are active.
6) Remote controller signal code
(Only for wireless remote controller)
The indoor unit signal code can be changed.
Select the appropriate signal code.
(  ... Factory setting)
Setting description Function number Setting value
 A
44
00
B 01
C 02
D 03
7) External input control
"Operation/Stop" mode or "Forced stop" mode can be selected.
(  ... Factory setting)
Setting description Function number Setting value
 Operation/Stop mode
46
00
(Setting change prohibited) 01
Forced stop mode 02
8) Indoor unit fan control for energy saving for cooling
Enable or disables the power-saving function by controlling the indoor unit fan rotation when
the outdoor unit is stopped during cooling operation.
(  ... Factory setting)
Setting description Function number Setting value
 Disable
49
00
Enable 01
00: When the outdoor unit is stopped, the indoor unit fan operates continuously following
the setting on the remote controller.
01: When the outdoor unit is stopped, the indoor unit fan operates intermittently at a very
low speed.