Fujitsu AOBR09LGC, Руководство по эксплуатации

Страница: 12 / 20

En-11
10°C HEAT OPERATION
•
The room temperature can be maintained at 10°C by pressing the 10°C HEAT button
(Fig.6
L
) so as to prevent the room temperature from falling too far.
To use 10°C HEAT OPERATION
Press the 10°C HEAT button (Fig.6
L
)
To stop 10°C HEAT OPERATION
Press the START/STOP button (Fig.6
L
)
Then the operation stops.
About the 10°C HEAT OPERATION
•
The Heating mode will not operate if the room temperature is high enough.
While 10 ˚ C HEAT OPERATION is in
progress, the following operations/
features cannot be used
• TIMER
• SLEEP
• FAN speed
• Swing
SWING OPERATION
COIL DRY OPERATION
The Indoor unit can be dried by pressing the COIL DRY button on the Remote Control Unit so as to avoid going moldy and restrain
the breed of bacterium.
The COIL DRY operation will operate for 90 minutes after pressing the COIL DRY button and it will stop automatically.
To select COIL DRY Operation
Press the COIL DRY button (Fig. 6
N
) during operation or when
it stops.
The COIL DRY Display (Fig. 7
e
) will light. Then, it will disappear after 10 seconds.
To cancel COIL DRY Operation
Press the START/STOP button (Fig. 6
R
) during COIL DRY
Operation.
The indoor unit COIL DRY Indicator Lamp (yellow) (Fig.1
7
) will go out. Then, the opera-
tion stops.
About COIL DRY Operation
●
Press the COIL DRY button again during COIL DRY Operation, COIL DRY Operation
can be reset.
●
The COIL DRY Operation cannot get rid of the existed mold or bacterium, and it has
no sterilization effect either.
Begin air conditioner operation before performing this procedure.
To select SWING Operation
Press the SWING button (Fig. 6
U
).
The SWING Display (Fig. 7
]
) will light.
In this mode, the Air Flow Direction Louvers will swing automatically to direct the air fl ow
both up and down.
To stop SWING Operation
Press the SWING button (Fig. 6
U
) once again.
The SWING Display (Fig. 7
]
) will go out.
Air fl ow direction will return to the setting before swing was begun.
About Swing Operation
During cooling/Dry mode : Swings between
1
and
3
.
During heating mode : Swings between
3
and
6
.
●
The SWING operation may stop temporarily when the air conditioner’s fan is not operating,
or when operating at very low speeds.
9317433044-05_OM.indb 11 9317433044-05_OM.indb 11 6/13/2013 2:39:55 PM 6/13/2013 2:39:55 PM