En-7
Press the ECONOMY button for more than 2 seconds to select
whether the room temperature is detected at the indoor unit or
the remote controller.
When the
thermo sensor indicator appears, the room
temperature is detected at the remote controller.
NOTES
•
If this function is locked, the location where the room temperature is detected cannot be changed and the
mark
fl
ashes
when the ECONOMY button is pushed for 2 seconds or more.
Indoor unit
Room temperature sensor selection
OPERATION
Child lock function
Press the DAY (DAY OFF) button and TIMER SET button simul-
taneously for 2 seconds or more to activate the child lock func-
tion and lock all of the buttons on the remote controller except
the START/STOP button, SET TEMP. buttons, MODE button,
and FAN button. Press the buttons again for 2 seconds or more
to deactivate the child lock function.
When the child lock function is activated, the
mark ap-
pears. If any button is pressed during the child lock, the
CL
indicator
fl
ashes.
•
This function is locked at the factory. In order to detect the room temperature correctly, consult authorized serv-
ice personnel when using this function.
9374379705_OM.indb Sec1:7
9374379705_OM.indb Sec1:7
6/26/2013 4:44:08 PM
6/26/2013 4:44:08 PM
