Fujitsu 985Tx, Руководство пользователя

Страница: 109 / 185

S e c t i o n F o u r
100
To Remove a Device from
Multi-function Bay 1
4. Slide the release latch on the left side panel
toward the bottom of your notebook.
5. While holding the release button in the
release position use the Multi-function Bay 1
Eject lever on the bottom of your notebook
(Figure 4-2) to push the device toward the
front of your notebook until the connector
is disconnected.
C A U T I O N
Be careful aligning and seating devices
in the bay. If the fit is incorrect you may
damage the bay or the device. If the
device does not move easily, remove
it, and check for dirt or foreign objects.
It will require a firm push to latch the
device in place.
6. Slide the device forward until the unit is clear
of the compartment.
To Install a Device in Multi-function Bay 1
4.Orient the item to be installed with the con-
nector toward the body of your notebook
and the flat side of the device with the
little metal square toward the body of
your notebook.
5. Align the grooves on the side of the
device with the tracks in the side of the
bay. (Figure 4-2.)
6. Slide the device firmly toward the back of
your notebook until it clicks into place.
Figure 4-2 Removing and Installing a
Device in Multi-function Bay 1
Multi-function Bay 1 Eject Lever
Connector for
Multi-function
Bay 1 Device
Multi-function Bay 1 Relese Button
C A U T I O N
Only one optional second battery is
supported. Your notebook does not
support three (3) batteries simultaneously,
and does not support a battery in
Multi-function Bay 1.
To Install or Remove a Device in
Multi-function Bay 1.
1. Close all files and exit all applications.
2. Turn off power to your notebook, close the
display and remove the AC adapter.
(See pages 24–25.)
3. Turn your notebook on edge with the left
side or bottom up and with the bay openings
toward you.