Troubleshooting and tips
34
A26361-K636-Z100-9-7619
The floppy disk cannot be read or written
Ê
Check that the write protection of the floppy disk or the floppy disk drive is activated (refer also
to the technical manual for the mainboard or to the "BIOS Setup" manual).
Ê
Check the relevant entries for
Diskette A:
or
B:
in the
Main
menu of the
BIOS Setup
.
Ê
Check that the floppy disk drive controller is enabled (refer also to the technical manual for the
mainboard or in the "BIOS Setup" manual).
Ê
Check that the cables of the floppy disk drive are properly connected (refer to "System
expansions" chapter).
Time and/or date is not correct
You can set the time and date in the
BIOS Setup
or in the operating system.
Ê
Set the time and date.
i
If the time and date are repeatedly wrong when you switch on your PC, the on-board
battery is flat. Change the lithium battery as described in the "System expansions"
chapter.
Error messages on the screen
Error messages and their explanation are contained:
•
in the technical manual for the mainboard
•
in the "BIOS Setup" manual
•
in the documentation for the programmes used.
Restoring the hard disk contents
Should you need to restore your hard disk, the instructions are provided on the case of the
"Recovery CD" (delivered with your system).
