RX220
Service Supplement
17
4
Replacement routines
V
CAUTION!
When handling systems and boards, make sure you observe the safety
information in the
chapter “Safety notes” on page 11
4.1
Preparation
To replace non-hot-plug components, proceed as follows:
Ê
Shut down the operating system.
Ê
Switch the server off.
Ê
Pull the power plug out of the safety socket.
4.1.1
Opening/closing the server
Figure 2: Removing the server
Ê
Undo the knurled screws (1) and pull the server carefully out of the rack as
far as it will go (2).
In most cases it makes sense to remove the server from the rack cabinet.
1
1
2
